657mm (h)
505mm (w)
44mm (d)
Quantity: 3
552mm (h)
402mm (w)
The total space for both glass and beading is 24mm. Most customer opt for 14mm double glazing with 9mm beading.
1780mm (h)
755mm (w)
44mm (d)
Quantity: 1 or 2
1574mm (h)
612mm (w)
Two identical single doors. One to be left-hinged and one to be right-hinged.
1780mm (h)
1510mm (w)
44mm (d)
Quantity: 2
938mm (h)
612mm (w)
There is a total space of 24mm to fit both glass and beading. Most customers opt for 14mm double glazing with 9mm beading.
Studwork for a partition, enabling you to section the inside of your hut into separate rooms.
Useful if you intend to build a bathroom, store room or similar. We build a doorway into each partition, enabling you to fit an internal door or curtain if required.
By default, we build the door opening in the centre of the partition, if you’d like it offset to the right or left, just let us know.
If opting for a partition, we will need to know exactly where in the hut it will be placed as this may affect how we build your kit.
If you’re purchasing our 12mm internal tongue and groove cladding for the inside of your shepherd’s hut, don’t forget to also add the same cladding option for your partition.
Doorway Opening: 1803mm(h) x 710mm(w)
A Turntable allows you to easily turn your shepherd’s hut as you tow it.
It replaces the standard front axle of your hut.
We highly recommend purchasing the drawbar with this option for easy towing.
A drawbar allows you to easily tow your shepherds hut in a straight line when you need to move it.
It fixes easily to the front axle of your hut and is compatible with both the standard axle and the turntable.
If you require your shepherd’s hut to be able to turn when towing, you’ll also need the turntable upgrade.
1.6M (L)
1M (W)
Important Information about our timber cladding:
Tongue and Groove Cladding – This cladding is provided in UNCUT lengths. We always provide adequate amounts for each build. We calculate this based on the assumption that the kit will be clad horizontally. If you are planning to clad vertically, please contact us prior to ordering.
Each kit is individual with most customers wanting their own window and door layout. Because of this, we are unable to provide a cutting list and it is essential that you, the customer are able to calculate the most efficient cutting method to cover all panels with minimum wastage.
We do not provide finishing strips, skirting, coving, beading or fixings for cladding. You will need to purchase these from a local DIY merchant if required.
Important notes about our external metal cladding:
We provide this cladding as two different sheet sizes; 2.1m x 1m for the long sides and 2.5m x 1m for the ends.
With this metal cladding, we also supply four corner fascias (barge board flashing), metal screws and colour coded screw caps.
The customer is responsible for cutting out the window and door apertures and to accommodate the end curves.
It is always a good idea to pre-plan all cuts and fitments beforehand. Measure twice and cut once is a good rule to follow.
You will receive five longer sheets for the hut ends in order to accommodate the curve of the roof. One of these sheets will need to be cut in half, so that you have two and a half sheets for each hut end.
1780mm (h)
755mm (w)
44mm (d)
Quantity: 1
938mm (h)
612mm (w)
There is a total space of 24mm to fit both glass and beading. Most customers opt for 14mm double glazing with 9mm beading.
1042mm (h)
505mm (w)
44mm (d)
Quantity: 3
938mm (h)
402mm (w)
There is a total of 24mm of space to fit both glass and beading, so most customers opt for 14mm double glazing with 9mm beading.
Our Metal Base Frames are constructed from steel box metal and are an upgrade to the tanalised timber base frame that comes as standard with our shepherd hut kits.
Each metal base frame comes with a wooden floor frame that sits inside it as pictured. The supplied OSB flooring is then fixed down to this.
Shepherd’s hut kit sizes 3.6, 4.2 and 4.8m:
40mm x 80mm Box Metal
Shepherd’s hut kit sizes 5.4 and 6m:
50mm x 100mm Box Metal
The 6m shepherds hut kit comes with a metal base as standard.
For all other sizes, it is an optional extra.
Pine, Tanalised Featheredge Boards:
Important Information about the timber cladding we provide:
Timber Cladding (internal and external) – This cladding is provided in UNCUT lengths. We always provide adequate amounts for each build. We calculate this based on the assumption that the kit will be clad horizontally. If you are planning to clad vertically, please contact us prior to ordering.
Each kit is individual with most customers wanting their own window and door layout. Because of this, we are unable to provide a cutting list and it is essential that you, the customer are able to calculate the most efficient cutting method to cover all panels with minimum wastage.
We do not provide finishing strips, skirting, coving, beading or fixings for cladding. You will need to purchase these from a local DIY merchant if required.
External Featheredge – all overlap boards for the exterior should be installed with approximately 20mm overlap and no less, as the boards can naturally shrink in hot weather.
Under very extreme weather conditions, the boards can twist and move if they are not securely fixed. Avoid fixing the boards too close to the edge as this may split the boards.
