Free Delivery to Mainland England and Wales

Shepherd's Hut Kit
Customer Gallery

Shepherd's Hut Kits - Assembled Front View

Back to:

Shepherd's Hut Kits

3.6M Kit - Wheel Base Measurements

3.6M Shepherds Hut Kit Footprint

4.2M Kit - Wheel Base Measurements

4.2M Shepherds Hut Kit Footprint

4.8M Kit - Wheel Base Measurements

4.8M Shepherds Hut Kit Footprint

5.4M Kit - Wheel Base Measurements

5.4M Shepherds Hut Kit Footprint

6.0M Kit - Wheel Base Measurements

6.0M Shepherds Hut Kit Footprint

Lowered Axles - A free exchange for our taller, standard axles

  • These lowered axles will bring your shepherd’s hut overall height down to 2.9M (standard height is 3.2M)
  • The height from the ground to the eaves will be 2.45M.
  • This option is not compatible with the drawbar or turntable options.

Short Windows
(A free Exchange for our Standard Windows)

short windows

Quantity Supplied: 3

  • 1 x left hinged and 1 right hinged (to make a double window)
  • 1 x top hinged (to make single, end window)

Window Dimensions:

657mm (h)

505mm (w)

44mm (d)

Glass Size Required:

Quantity: 3

552mm (h)

402mm (w)

The total space for both glass and beading is 24mm. Most customer opt for 14mm double glazing with 9mm beading.

Glass and beading are not supplied by Glampods.

French Door(s) - A free exchange for our Standard Doors

French Door Single
French Doors Double

Quantity supplied:

  • 1 as standard 
  • 2 when combined with our Double Door Upgrade

Each Frames Dimensions:

1780mm (h)

755mm (w)

44mm (d)

Glass Size Required:

Quantity:  1 or 2

1574mm (h)

612mm (w)

  • The total depth of the door is 44mm.
  • The rebated space for both glass and beading is 24mm.
  • We recommend double glazed units of up to 14mm which then leaves 9mm for beading.

Glass, beading and door furniture are not supplied by Glampods.

Steps

Made from strong 50mm thick pine timber, a pair of steps will allow you to get in and out of your shepherd’s hut without risking a muscle injury.

Buy them to match either your single or double doors. If you’re having our lowered axles, we’ll build your steps shorter to match.

Double Door Upgrade

Double Door Upgrade

Double Door Consists of:

Two identical single doors. One to be left-hinged and one to be right-hinged.

Double Door Dimensions:

1780mm (h)

1510mm (w)

44mm (d)

Glass Size Required:

Quantity: 2

938mm (h)

612mm (w)

There is a total space of 24mm to fit both glass and beading. Most customers opt for 14mm double glazing with 9mm beading.

Glass, beading, door hinges, handles and locks are not supplied by Glampods.

Internal Partition

Studwork for a partition, enabling you to section the inside of your hut into separate rooms. 

Useful if you intend to build a bathroom, store room or similar. We build a doorway into each partition, enabling you to fit an internal door or curtain if required. 

By default, we build the door opening in the centre of the partition, if you’d like it offset to the right or left, just let us know.

If opting for a partition, we will need to know exactly where in the hut it will be placed as this may affect how we build your kit.

If you’re purchasing our 12mm internal tongue and groove cladding for the inside of your shepherd’s hut, don’t forget to also add the same cladding option for your partition.

Doorway Opening: 1803mm(h) x 710mm(w)

Turntable

Turntable Parts
Turntable with Wheels
Metal Base 6m Turntable Drawbar

A Turntable allows you to easily turn your shepherd’s hut as you tow it.

It replaces the standard front axle of your hut.

We highly recommend purchasing the drawbar with this option for easy towing.

The drawbar and turntable upgrades are not compatible with our LOWERED axles.

Drawbar

Drawbar
Metal Base 6m Turntable Drawbar

A drawbar allows you to easily tow your shepherds hut in a straight line when you need to move it.

It fixes easily to the front axle of your hut and is compatible with both the standard axle and the turntable.

If you require your shepherd’s hut to be able to turn when towing, you’ll also need the turntable upgrade.

Drawbar Overall Measurements:

1.6M (L)

1M (W)

The drawbar and turntable upgrades are not compatible with our LOWERED axles.

Foam Insulation Boards

Foam Insulation Boards

Properties:

  • Polystyrene Foam Insulation Boards
  • 50mm thickness
  • 0.038 W/mk
  • Compressive strength: 70kPa @ 10% compression
  • BBA certified
  • We supply enough to insulate all walls and roof

Internal Tongue and Groove Cladding

Tongue and Groove
  • Pine, kiln-dried tongue and groove, untreated.
  • 12mm board depth
  • 115mm board height

Important Information about our timber cladding:

Tongue and Groove Cladding – This cladding is provided in UNCUT lengths. We always provide adequate amounts for each build. We calculate this based on the assumption that the kit will be clad horizontally. If you are planning to clad vertically, please contact us prior to ordering.

Each kit is individual with most customers wanting their own window and door layout. Because of this, we are unable to provide a cutting list and it is essential that you, the customer are able to calculate the most efficient cutting method to cover all panels with minimum wastage.

We do not provide finishing strips, skirting, coving, beading or fixings for cladding. You will need to purchase these from a local DIY merchant if required.

External Metal Cladding

Corrugated Metal Cladding
Goosewing Grey
Jet Black
Terracotta Red
Anthracite Grey
Pure White
Sargasso Blue
Slate Blue
Juniper Green
Merlin Grey
Moorland Green
Olive Green

Important notes about our external metal cladding:

We provide this cladding as two different sheet sizes; 2.1m x 1m for the long sides and 2.5m x 1m for the ends.

With this metal cladding, we also supply four corner fascias (barge board flashing), metal screws and colour coded screw caps.

The customer is responsible for cutting out the window and door apertures and to accommodate the end curves.

It is always a good idea to pre-plan all cuts and fitments beforehand. Measure twice and cut once is a good rule to follow.

You will receive five longer sheets for the hut ends in order to accommodate the curve of the roof. One of these sheets will need to be cut in half, so that you have two and a half sheets for each hut end.

Standard Single Door

Single Standard Door

Quantity supplied: 1

Dimensions:

1780mm (h)

755mm (w)

44mm (d)

Glass Size Required:

Quantity: 1

938mm (h)

612mm (w)

There is a total space of 24mm to fit both glass and beading. Most customers opt for 14mm double glazing with 9mm beading.

Glass and beading are not supplied by Glampods.

Standard Windows

Standard Single Window

Quantity Supplied: 3

  • 1 x left hinged and 1 right hinged (to make a double window)
  • 1 x top hinged (to make single, end window)

Window Dimensions:

1042mm (h)

505mm (w)

44mm (d)

Glass Size Required:

Quantity: 3

938mm (h)

402mm (w)

There is a total of 24mm of space to fit both glass and beading, so most customers opt for 14mm double glazing with 9mm beading.

Glass and beading are not supplied by Glampods.

Metal Base Frame

Metal Base 4.8m
Metal Base 6m with Wooden Floor Frame
Metal Base 6m
Metal Base 6m with floor frames standard axles

Our Metal Base Frames are constructed from steel box metal and are an upgrade to the tanalised timber base frame that comes as standard with our shepherd hut kits.

Each metal base frame comes with a wooden floor frame that sits inside it as pictured. The supplied OSB flooring is then fixed down to this.

Box Metal Used:

Shepherd’s hut kit sizes 3.6, 4.2 and 4.8m:

40mm x 80mm Box Metal

Shepherd’s hut kit sizes 5.4 and 6m:

50mm x 100mm Box Metal

The 6m shepherds hut kit comes with a metal base as standard.

For all other sizes, it is an optional extra.

External Featheredge Cladding

Tanalised featheredge

Pine, Tanalised Featheredge Boards:

  • 12mm tapered board depth
  • 125mm board height
  • We recommend overlapping each board by 20mm

 

 

 

Important Information about the timber cladding we provide:

Timber Cladding (internal and external) – This cladding is provided in UNCUT lengths. We always provide adequate amounts for each build. We calculate this based on the assumption that the kit will be clad horizontally. If you are planning to clad vertically, please contact us prior to ordering.

Each kit is individual with most customers wanting their own window and door layout. Because of this, we are unable to provide a cutting list and it is essential that you, the customer are able to calculate the most efficient cutting method to cover all panels with minimum wastage.

We do not provide finishing strips, skirting, coving, beading or fixings for cladding. You will need to purchase these from a local DIY merchant if required.

External Featheredge – all overlap boards for the exterior should be installed with approximately 20mm overlap and no less, as the boards can naturally shrink in hot weather.

Under very extreme weather conditions, the boards can twist and move if they are not securely fixed. Avoid fixing the boards too close to the edge as this may split the boards.