External Featheredge Cladding
Pine, Tanalised Featheredge Boards:
- 12mm tapered board depth
- 125mm board height
- We recommend overlapping each board by 20mm
Important Information about the timber cladding we provide:
Timber Cladding (internal and external) – This cladding is provided in UNCUT lengths. We always provide adequate amounts for each build. We calculate this based on the assumption that the kit will be clad horizontally. If you are planning to clad vertically, please contact us prior to ordering.
Each kit is individual with most customers wanting their own window and door layout. Because of this, we are unable to provide a cutting list and it is essential that you, the customer are able to calculate the most efficient cutting method to cover all panels with minimum wastage.
We do not provide finishing strips, skirting, coving, beading or fixings for cladding. You will need to purchase these from a local DIY merchant if required.
External Featheredge – all overlap boards for the exterior should be installed with approximately 20mm overlap and no less, as the boards can naturally shrink in hot weather.
Under very extreme weather conditions, the boards can twist and move if they are not securely fixed. Avoid fixing the boards too close to the edge as this may split the boards.